This figure was made with some of the spare parts from my Ultimate Darth Vader. The legs and pelvis piece (including the butt cape) are from Kenner's Removable Helmet Vader. The torso, arms, and cape are from the regular Kenner Vader. The head was made from three parts. The first is an old-likeness Luke head, probably from a Jedi Luke; the top of the Luke head and the neck were cut off so that it would fit. The second part is the bottom half (from the jaw-line down) of the regular Vader head; the bottom of the post was cut down so that the head could come out but stay in place (like the removable hands on Vader and Bespin Luke). The third part is the removable helmet piece from the Removable Helmet Vader. A piece was cut out of the right side so that Luke's head is visible; the piece fits in the hole and usually stays in place when pushed in. Look for this figure in a Dagobah diorama in the near future.
|
|||
This
page last modified on
8/25/2006 |